Can You Hang Things On Hardie Board? (Follow This)

By - Ron Singh

Updated -

The finishing touch of every building is like icing on a cake. The Hardie board covers the exterior of your building both domestically and commercially.

In this article, I will explain how far you can go when hanging things on your Hardie board.

You can hang things on the Hardie board. You will need to have the appropriate tools to do that. Some tools and equipment that help hang things on your Hardie board include an appropriate screw, corrosion-resistant nails, and a drill.

How do you Hang Something on a Hardie Board?

Can You Hang Things On Hardie Board

You can hang some things on the Hardie Board using specialized tools and equipment.

How you hang these things depends on the weight and size of what you want to hang. The hardy Board is a type of siding made of cement fibers

These materials make it extremely durable and capable of holding heavy and light substances.

When you need to hang a heavy material on your Hardie Board, you may require a different technique from a light material.

You can hang lightweight materials like hanging baskets, small bags, and paintings on the Hardie board.

To consider these items lightweight, they must weigh at least 1 pound or less. For items heavier than one pound, you can consider them heavy.

Once you have the right tools, you can hang the lightweight materials on the Hardie board. Any material You can hang less than one pound directly.

You will need a masonry drill and a screw to hang the basket directly. These implements fasten the baskets on the plank.

Once the basket is in place, you can insert that beautiful flower to decorate the interior of your apartment.

The masonry drill drives the screw through the Hardie Board without cracking the Board.

Aside from driving the screw into the Board, the masonry drill reduces the noise that is accompanied by driving screws.

Before you hang the baskets, you must first make a marking on the Hardie Board. This marking gives you an idea of where exactly to situate the screws as it drives through the basket.

Ensure to keep a good distance between the screws and between the baskets. This distance ensures that you place the baskets on vintage positions without compromising the integrity of the Board.

Having screws too close on the Board may make the board crack. You will need extra equipment to carry this out when fastening heavy materials above one pound.

You will need the masonry drill, screws, and stud finders to hang this substance. Stud finders are a vital component of this activity.

You will have very precise work with the use of the stud finders. Once you have all the required equipment, select where you want to hang your basket. 

Once you have the location, mark it with a pencil or marker. You can drive your screw into these markings and use the stud finders to trace them from behind.

Measure the diameter of the material you want to hang, and divide the result by two. A hanging bracket about an inch more than the size of the result will be perfect. 

Fasten the bracket with the screws on the Hardie Board. The basket will hang on the bracket in the vertical direction. Once the basket sits comfortably on the bracket, then you have done a nice job.

Aside from the stud finder, masonry drill, and screwdriver, other tools are also necessary to make your work smooth.

When you drill through the Hardie Board, you must wear eyeglass and a dust mask.

This equipment prevents the debris from entering your eyes or any other opening on your face. You will need a pair of gloves, safety glasses, ear plugs, and a tape measure.

Can you Screw Things into a Hardie Board?

You can screw things into a Hardie board with a drill and screw. You can change the outlook of the Hardie board by placing things on the Board.

To place these things, you must screw them on the Hardie Board. To effectively drive screws into the Hardie board, you must use suitable screws.

Some screws that you can easily drive into the Hardie Board include a ribbed stainless screw with a wafer head.  

The Hardie board comprises cement fibers that make it highly durable. It is a plank laid with cement to increase its tensile strength and durability.

The cement layering is a mixture of ground sand, cellulose fiber, and wood pulp. The Hardie Board has become popular because of its strength.

It is more durable than wood yet still looks like wood. Aside from its durability, the Board is fire resistant and requires little maintenance. 

Screwing things to the Hardie is important because it allows you to modify how the Board looks by changing its appearance.

These hangings may become difficult for non-professionals to install because you may require some specialized tool.

Due to the thickness of the Board, you have to use a screw that can perforate the Board adequately. The 1¼-inch screw is the ideal screw length for the Hardie Board. 

Using the correct screws ensures that whatever you hang on the Hardie Board remains fastened.

Another important screw type on the Hardie Board is the corrosion-resistant screw. This screw keeps the basket fastened to the wall even when wet.

Can you Hammer a Nail into a Hardie Board?

You can also hammer a nail into the Hardie Board. The Hardie board can admit nails of varying sizes.

To successfully drive a nail into the Hardie Board, you must maintain a steady hand, a good swing, and a right touch.

Since hammering a nail requires so much force, you must maintain a distance of at least 4inches between the nails.

A good distance between these nails prevents the Board from cracking and breaking away. 

A better alternative that you can use when driving the nails is the use of a nail gun. The nail gun drives the nail through the plank easily and has a reduced risk of breaking the plank.

Extra care must be applied when hammering a nail into a Hardie Board. Aside from just driving the nail, You should implement several personal protections.

It would be best to put on personal protective equipment when carrying out this activity.

This equipment is necessary because they protect your body from any harm as you nail. This personal protective equipment includes a glove, a face mask, and a helmet. 

Of the nails you can use, it is best that the 0.121 inches in diameter roofing nail you can consider ideal. For better penetration, the hot dipped galvanized or stainless steel with a length of 3/8 inch.

Can you Use Command Hooks on Hardie Boards?

Command hooks let you hang things on your Hardie board without using tools or strenuous effort.

You can use the command hooks on your Hardie board, and You can place the hooks anywhere you want them so that you can hang your stuff. 

The command hook can work perfectly indoors but not outdoor. The command hook is made of an adhesive material that sticks to the Hardie plank without the need to drill holes. 

The adhesive material is placed behind the command hook. This part of the hook adheres to the Hardie board and holds it in place.

The hook has an extension that you could pull out, providing the spot where You can latch onto your material. 

Command hooks are not suitable for heavy materials. They are used to keep lightweight material on the Hardie Board without having to drive nails or screws through the Board.

Another disadvantage of the command hook on the Hardie board is that You cannot use it outdoor.

When used outdoor, the elements weaken the adhesives on the command hook, and it begins to drop. 

The elements that weaken the grip of the command hook include the sun, wind, and rain.

For the command hook to last outdoor, You must place it on a shed. The shed will serve as a covering from the wind, rain, and sun. 

The command hook is very flexible, and you can choose to move your hangings at any time without being bothered by screws or nails.

It does not leave behind any scratches or distort your painting. Here is a summary of the advantages and disadvantages of the command screw.

FlexibleCannot carry heavy hangings
Comes in a varietyFragile
Easy to moveIt does not last for long
Preserves your wallYou cannot use it outdoor

Can you Drill Through the Hardie Board?

Yes, you can drill through the Hardie board with the appropriate tools. You can drill through the Board with a masonry drill and a screw.

When you have heavy hangings, you will need other equipment like the stud finder to effectively drill through the Board. 

The screwdrivers make an impression on the Hardie board, thereby distorting the paints on the Board.

When you want to move the hangings on the Board to another position, you may need to remove the bracket and place them in another position. 

When you drive screws through the Board, you must be careful not to keep them too close.

You must leave a space of 8 inches between screws. By so doing, you may damage the Hardie board and crack it.


The Hardie board is a plank that is covered with cement fiber. This covering makes it durable. You can hang anything on the Hardie board, whether heavy or light.

The Hardie board accommodates screws and nails. A special form of a hook is used on the Hardie board.

This hook allows for the hangings to latch on the wall. You can drill into the Hardie board with a screw or a nail with the right equipment.

Sharing is caring! Spread The Love!

Why Trust Our Information

At, we are dedicated to delivering precise and trustworthy information. Our content is meticulously developed and validated by a panel of Expert Contributors, adhering to strict Editorial Guidelines. Our commitment is to ensure that you receive thoroughly researched and expertly crafted information.