Hisense Dehumidifier Best Settings For Maximum Performance!

By - Rajib Ahmed

Updated -

Published -

To properly use a Hisense dehumidifier, users must find the best settings to maintain comfortable indoor humidity.

Hisense dehumidifiers have three different settings you can choose from, and it would help if you found the right balance between energy usage and dehumidification performance.

So, what are the best settings for Hisense dehumidifiers?

The best setting for Hisense dehumidifiers is the Auto dry mode with a relative humidity of 50 percent and fan speed set to auto. This efficient mode allows for effective moisture removal without too much power consumption. The best settings vary from mode to mode, so it is best to adjust accordingly.

This article will highlight the best settings for Hisense dehumidifiers, considering relative humidity and fan speed.

What are the Best Settings for a Hisense Dehumidifier?

Hisense Dehumidifier Best Settings

There is no singular best setting for Hisense dehumidifiers, as others work best in different situations.

The closest to the best settings, which I will call the overall best, is the Auto dry mode with RH at 50 percent and fan set to auto.

Here are the best settings and modes you can select on your Hisense dehumidifier.

#1. Auto Dry Mode

The auto-dry mode is the overall best mode in Hisense dehumidifiers today. This mode has the best efficiency out of the rest and is very easy to control.

Auto dry mode is best suited for small to medium-sized rooms that are easy to dehumidify.

#1. Relative Humidity

Auto dry mode sets the room’s relative humidity to a comfortable 50 percent and shuts itself down automatically after reaching it.

A relative humidity of 50 percent is perfect as it is in a comfort zone that is not too dry or damp.

Auto mode also maintains the humidity of a room without needing any further input. The low humidity prevents the growth of bacteria and mold on the room’s walls.

#2. Fan speed

The unit controls the fan speed on auto mode, so the fan’s speed can change, either increasing or decreasing, depending on the humidity in the room.

Higher fan speeds mean more noise, but the humidity drops faster, while lower fan speeds are the reverse, with lesser noise and a slower drop in humidity.

Overall, auto mode suits various rooms and has good humidity control and high accuracy.

#2. Manual Mode

Manual mode has the most customizable options on the Hisense dehumidifier. This mode allows you to tweak all aspects of the unit, from RH percentage to fan speed.

In manual mode, you can set timers to turn off the dehumidifier at a particular time or turn it on later.

Manual mode is the best choice if you want to customize the dehumidifier’s operation fully.

#1. Relative Humidity

Unlike auto dry mode, you can raise or lower the relative humidity setting of manual mode. Dehumidifiers typically start from 30% up to 90%  RH.

You are free to adjust the humidity level freely in manual mode.

If you press the plus or minus button, you can increase or reduce the humidity level in increments or reduction of 5 percent.

#2. Fan Speed

The Hisense dehumidifier has fan modes that are automatic, high, and low. 

Users can choose the fan mode they prefer with a manual setting, and the fan will maintain that speed until the humidity.

Auto fan speed uses sensors to automatically increase or lower the fan until it reaches the desired humidity.

On the other hand, high fan mode spins the fan at max speed until the desired humidity. It dehumidifies faster, but it consumes a lot of power.

Lastly, low fan speed spins the fan slower and is ideal for slow but steady dehumidifying. This mode is silent and consumes less power.

#3. Continuous Mode

Continuous mode is the best for dehumidifying rooms with very high humidity for a long time.

The dehumidifier runs at maximum power and high fan speeds in this mode.

The Continuous mode might not have the best customization and efficiency compared to other modes, but it has the best dehumidifying effect.

#1. Relative Humidity 

Sadly, changing the continuous mode’s relative humidity setting is impossible.

Continuous humidity sets the relative humidity to the lowest value the dehumidifier supports and dehumidifies constantly.

#2. Fan Speed 

The fan speed is the only setting you can adjust when the unit is in continuous mode.

If you leave the unit to run for a long time, low fan speed will save power and increase efficiency.

Should your Hisense Dehumidifier Run at High Speed or Low Speed?

You can run your Hisense dehumidifier at high or low-speed settings whenever possible. The desired speed is dependent on your needs at that moment.

Some situations need high fan speeds; in others, low fan speeds are sufficient.

Here are some situations where you can run the dehumidifier at high or low speed.

#1. High Speed 

You can run the Hisense dehumidifier at high speed to reduce moisture quickly. It will help if you run the dehumidifier fan quickly during high-humidity days.

Rainy days are one of those days with high humidity. Rain brings a lot of water vapor and can quickly increase ambient humidity.

Summer days are also hot and humid, so run the dehumidifier fans at full power on such days to reduce the relative humidity.

#2. Low Speed 

The ability of air to store water vapor reduces with a drop in temperature. That means ambient humidity drops during winter.

If you must run your dehumidifier in winter, you are better off running the fan on low speed.

Slow fan speed is less noisy and vibrates less. You also get better power efficiency which is a plus.

What are the Best Settings for a Hisense Dehumidifier in a Basement?

The best settings for a dehumidifier in a basement are continuous running and high fan speed.

Basements are located underneath houses and are always cold and damp. If you don’t control the humidity in your basement, mold, and mildew can destroy the walls and properties stored there.

Continuous mode on Hisense dehumidifiers sets the RH to the lowest the unit can attain and sets the fan high.

Basements are humid, so you must continuously run the dehumidifier at maximum power if you want an acceptable RH level.

It would help to get your basement to an acceptable 50-60 percent relative humidity to stop mold. Any RH higher than that is too damp for comfort.

In essence, a difference of 10% relative humidity can be the difference between comfortably humid and uncomfortably dry or humid.

Here is a table showing the comfort ranking to the relative humidity percentage.

Comfort Ranking Percentage of Relative Humidity 
Uncomfortably Humid70 – 100 Percent
Comfortable 30 – 69 Percent 
Uncomfortably Dry0 – 29 Percent 

How to Run a Hisense Dehumidifier Efficiently?

Hisense dehumidifiers consume an average of 360 watts during normal operation. You can reduce and increase the efficiency based on how you run it.

Choosing the best settings for your Hisense dehumidifier can and will enhance its efficiency.

Here are some well-established ways of improving the efficiency of your dehumidifier.

#1. Run the Dehumidifier on Auto Dry Mode

Hisense dehumidifiers have auto dry mode, which powers the unit, changes the relative humidity to 50 percent, and sets the fan to auto.

In this mode, the dehumidifier runs until it detects the relative humidity has fallen to 50 percent, after which it shuts down.

Automating fan and compressor sequence control increases the dehumidifier’s efficiency.

Also, you should turn off the dehumidifier when it is not in use to save power.

#2. Remove Obstructions

Humidifiers draw in air, dry it, and release it into the room. If an object affects the airflow, it will severely impact performance and efficiency.

Obstructions can be in the form of walls, boards, or curtains. Removing such obstructions or relocating the unit will improve the dehumidifier’s efficiency.

#3. Clean the Air Filter Regularly

All Hisense dehumidifier units have air filters installed. The air filter gets dirty based on the hours you operate the dehumidifier and how dusty the atmosphere is.

If dirt blocks your dehumidifier air filter, its performance will drop sharply. The air filter button has a light that will turn on and shut down the dehumidifier when it detects a blocked air filter.

So, you need to open the dehumidifier and clean and reinstall the air filter. You can purchase fairly inexpensive compressed air dusters to aid you in cleaning the air filter.

SaleBestseller No. 1
Compressed Air Duster-3 Gear Adjustable 100000RPM Electric Air Duster with LED Light, Rechargeable...
  • Powerful Performance:The air duster has a...
  • Fast Charging and LED Display:Our electric air...
  • Alternative to Compressed Air:Compared with...
  • Versatility:The compressed air duster is...
SaleBestseller No. 2
Dust-Off Disposable Compressed Gas Duster, 10 oz - Pack of 2
  • Removes dust, lint and other contaminants from...
  • Ideal for cleaning cups, keyboards, computer mice,...
  • Also great for cleaning items around the home...
  • 100% ozone safe, contains no cfcs, huffs, propane...
Bestseller No. 3
Innovera IVR10016 10 oz. Compressed Air Duster Cleaner (6/Pack)
  • Quickly remove dust and dirt from difficult to...
  • 100% Ozone safe and moisture free, safe to use on...
  • Removable straw for pinpoint cleaning.
  • Contains a bitterant to discourage inhalant abuse.

Last update on 2023-11-06 / Affiliate links / Images from Amazon Product Advertising API

After cleaning and installation, press the filter reset button to clear the error code and restart the dehumidifier.

#4. Use Timers to Limit Runtime 

Hisense dehumidifiers have timers users can use to delay start or stop at a particular time.

The timers keep the unit efficiency high because they can turn off the unit when you are not home and turn it on when you are.

Sharing is caring! Spread The Love!