Some homeowners use black tiles for their toilets and bathrooms, hoping that this would be able to hide the dirt and stain from the legs, but the contrary is the case.
Instead, this would leave you with a dull appearance; if that is your case, you’re at the right place. We’ll be providing you with tips on how to clean your black floor tiles.
If you use just ordinary cleaning agents, you have to switch to one which contains distilled white vinegar and a good soap that would bring back the shine to your floor tiles and make them look their best.
How to Clean Black Floor Tile In Bathrooms?
Using a black tile in your bathroom is usually rare, but in cases where it occurs, you have to be careful when maintaining them because the stain on it can be noticeable.
Most people who get black tiles installed in their bathroom think that the color doesn’t let the dirt show much like white one, but in these cases, it is vice versa.
For you to be here, you must have been struggling with the stains and unnoticeable dirt that is stuck on your bathroom floor tile; I feel your pain! There are many ways to get rid of these stains from your tiles.
Before getting into this, you must be sure of the type of stain you want to get rid of beforehand. Most types of dirt you would see are from soap scums, hard water stains, mold, and paint.
One crucial factor you should consider before cleaning your bathroom floor tile is to check if the material you used to make it is either porcelain or matte.
If the tile is from either porcelain or matte, ensure that you do not leave acid for too long on the tiles; to be on the safer side, do not even use acid-based cleaners.
These cleaning methods include;
#1. Using a Vinegar and Water Solution
Some of you might not have heard that vinegar is effective for anything other than a cooking ingredient, but then you should go back and do research because the versatility of vinegar would wow you.
This method would work best when handling soap scums or hard water stains.
To clean with the vinegar-water solution, you would need;
- White distilled vinegar.
- Spray bottle.
- Water.
- A sponge.
Mix equal amounts of water and vinegar and pour the mixture into your spray bottle. Then spray the mixture on the affected area for 10-15 minutes and leave on the stains.
If your bathroom is at a sloped angle, ensure that you spray from the highest rise and then down to the lower parts.
After the time-lapse, use your sponge and scrub thoroughly until all the stains are no longer visible.
When you are sure you have cleaned enough, rinse it off with water to remove any residue from scrubbing, and then leave your floor to dry.
Suppose you do not have any vinegar available. In that case, a suitable alternative can be lemon because it possesses citric acid that is also contained in vinegar and is also known to be a good disinfectant.
Again, you should get the same materials you would need when cleaning with vinegar but this time, replace vinegar with lemons.
Steps you should follow:
- Cut the lemons into halves and squeeze the juice into a spray bottle. Make sure you get enough lemons to go around your bathroom.
- Spray the liquid on the tiles and leave it for about 10 minutes, and after the time is over, scrub the tiles with your wet sponge and scrub the floor thoroughly.
- Rinse with water and leave to dry.
#2. Use Baking Soda and White Vinegar
Baking soda and white vinegar work excellently individually; not imagine them paired together, fantastic!
Baking soda is an abrasive cleaning agent, while white vinegar is acidic, but when you mix these two, their working action becomes stronger.
For this solution, you would need;
| Items | Buy |
|---|---|
| Baking soda. | Check the Price |
| White vinegar. | Check the Price |
| Stiff brush or sponge. | Check the Price |
| Water |
#1. Procedure to follow:
- Make a paste-like solution using equal amounts of white vinegar and baking soda.
- Spread the paste on your tile with your stiff brush or sponge and then let it sit for about 10-15 minutes; ensure that the paste gets to every affected area.
- After the time-lapse, you can use the same brush and scrub thoroughly until softer specks come off.
- Rinse the tile. After this, leave to dry.
#3. Use a Tile Cleaner
Like the vinegar-water solution, they made this tile cleaner to remove stains from soap scums and hard water.
You should keep this product out of the reach of your kids because it may be very toxic to their bodies.
These cleaners work well for porcelain and ceramic tiles, but you have to get a different product if your tile is of granite or marble.
For this solution, you would need;
- Tile cleaner.
- Sponge or brush.
- Water.
#1. Procedure
- On a portion of dry tiles, take a small amount of tile cleaner and apply and wait for some time to see if it affects your tile type before applying to the whole bathroom.
- Leave the mixture on your tile for about five minutes but ensure that it doesn’t dry off on your tile.
- You can now use your brush or sponge and scrub the affected area until you have appropriately removed the dirt.
- Rinse off and leave to dry.
Some other effective cleaners include muriatic acid and warm water mixed with soap and salt.
The method of using these cleaners works almost the same as the vinegar and lemon cleaners.
Still, you should be very careful when using muriatic acid and ensure that you use gloves and a mask before applying because the acid can be toxic if it comes in contact with the skin.
| Cleaning Agents | Stains to Use For |
|---|---|
| Vinegar + water | Hard water stains and soap stains |
| White vinegar & baking soda | Mold |
| Muriatic acid | Paint |
How to Clean Matte Black Floor Tiles?
There are several ways you can wash your matte finish tiles. One of the best ways to do this is to utilize a mild solution of warm water and mix it with a small amount of detergent or soap, which would do the trick.
Using this solution on your tile is easy; get a brush and use it to scrub your tiles thoroughly and after that, rinse with warm water and use a lint-free cloth to wipe it out.
If you want to go a bit extreme, you can use baking soda and mix it with your mixture of detergent and water to get stains off your tile floors.
If you want your tiles to maintain their shine, you can apply a mixture of white vinegar and water and scrub with your brush thoroughly and watch it work out its magic.
How to Clean Black Gloss Floor Tiles?
Gloss floor tiles are excellent in showing off watermarks, grease, fingerprints, and even grime, so you have to maintain them and ensure they look glossy.
There is no magic to making sure that these tiles always look good. You have to clean them frequently and maintain them all the time.
Some people use liquid detergents to get rid of grimes, but sometimes, they leave a residue on the surface, which is not what you would want.
So instead, you must obtain a mixture of vinegar and water and clean carefully from one section to another; mind you, you should not step on this tile when it is wet because it can also mess up your work.
Not all cleaning agents are suitable for all tile types, so you need to do proper research on a detergent or cleaning agent before using it on your tile.
How to Clean Black Ceramic Floor Tile?
Before you start, ensure that you get rid of every rug, shoe, or furniture that might get in your way, and then follow these cleaning steps;
- Remove dirt and sand from your space with either a vacuum cleaner or a broom, and if there are some other sticky residues that you can remove easily, you can use a plastic knife to get rid of them.
- Get a bucket filled with hot water, half a cup of vinegar, and then half a tablespoon of dish soap; do not use too much soap, so the surface doesn’t become too slippery.
- Get a clean mop and mop the floor with soapy water; soapy residues come off quickly with hot water.
- You can now let your floor air-dry, but if you can get a clean napkin or dry mop to get rid of the water, it would be much preferable.
How do I Make Black Tiles Black Again?
For you to be able to make your black tile glow again., you should switch from regular cleaning detergents to the ones that contain castile soap and distilled white vinegar.
Doing this would ensure that your black tile looks its best without any spots of residue left.
Many people have this mentality that if they lay black tiles on their floors, it would help hide the dirt and make it not too noticeable.
But unfortunately, the result is the complete opposite. In most cases, black tiles hide a lot of dirt by robbing your tile of its shine.
Things to Consider When Cleaning Black Tiles?
One of the basic things you need to know before cleaning your black floor tiles is the nature of the tile.
Not all black tiles are the same, some are ceramic while others are porcelain or matte, and the type of tile you have goes a long way in determining the cleaning method to use.
Some cleaners are not suitable for your black marble tiles, while they can work efficiently for your matte tiles.
So when next you go shopping, check the description for the ingredients used in a particular cleaner and check if it is suitable for your tile before using it.
Conclusion
When you maintain your tiles by cleaning them with the appropriate cleaning agent, you will not have a problem with them later on.
So if you have either a ceramic, matte, porcelain or marble tile, we have provided you with enough cleaning agents that you can use to keep your tile clean and odor-free.
