Skip to Content

How To Test Moisture Sensor On LG Dryer? (Answered)

Sharing is caring! Spread The Love!

Homeguideinfo! is supported by its readers. If you purchase something from one of our links we make a small commission at no extra cost to you."

You might have wondered why your dryer keeps shutting down after a few minutes of starting its cycle.

Or perhaps, it keeps spinning even after your clothes have dried, making them overdried.

Dryers are manufactured to save your time during laundry but can be frustrating if it gives you problems.

This article will help you discover many things about your dryer and why it refuses to work normally.

When testing your LG dryer’s moisture sensor, you first need to place dry clothes inside the dryer. Then, turn the dryer on. If your dryer is working well, it will run for a few minutes and then shut down. So, the next step is to place wet clothes inside the dryer and turn it on just like you did the first time. 

How To Test A Dryer Moisture Sensor?

The function of the moisture sensor in your dryer is to help you detect moisture in your clothes.

It checks how damp your clothes are inside the dryer, and it automatically notifies your dryer to stop whenever your clothes dry completely.

One of the maintenance your dryer needs is to test its moisture sensor from time to time.

This will help you discover whenever it’s faulty, making laundry more straightforward and stress-free.

Therefore, below are the steps you must follow when carrying out a moisture sensor test on your dryer;

  • Place dry clothes inside your dryer and turn it on.
  • Your dryer will start working, and after a few moments, it will shut down.
  • Remove the dry clothes, place damp ones inside the dryer, and then turn it on.
  • The dryer will run until the clothes are dried thoroughly.

In short, if the dryer runs for some minutes and doesn’t shut down, that means it’s operating efficiently and it passes the test.

Where Is the Moisture Sensor on LG Dryer?

Perhaps, you have been worrying about where the moisture sensor is located on your LG dryer.

Yes, we understand that the moisture sensor is mainly found at the back of olden-day dryers, which can be confusing.

Worry not because it’s straightforward to locate. Check the front part of your dryer; you will find the moisture sensor bar behind the lint trap. And you may want to ask;

#1. What’s A Lint Trap, And What Are Its Functions?

A Lint trap is one of the parts that make up a dryer, and it basically acts as a filter in your dryer. It helps you trap soft and small particles in your clothes when drying them. 

You need to be cleaning it often, both before and after use, to ensure optimum efficiency of your dryer’s operation and so that it can last long.

It will also prevent breaking down, thereby saving you from spending irrelevant money on repairs. 

And lastly, it prevents lint fire outbreaks, thereby saving your dryer and you, the owner, from electrical hazards.

You can remove the lint trap from your dryer anytime for cleaning.

#2. How To Clean The Lint Trap of Your Dryer

Your clothes refuse to dry or sometimes take longer than normal before drying due to your dryer’s blocked lint trap.

Moreover, if water doesn’t flow freely through the lint trap, there must have been a blockage caused by lint, that is, your clothes remnants such as wool. 

Cleaning the lint trap is easy, and it doesn’t require much time. However, if your dryer’s lint trap isn’t too dirty, you need to use a clean towel to wipe it if there is not much debris inside it.

But if there are lots of junk clogged inside it, then it will have to undergo a thorough cleaning. Follow the steps below to clean your dirty lint trap;

  • The first step is to unplug your dryer from the electric socket.
  • Locate the lint trap on your dryer.
  • Remove the lint screen from your dryer and wash it with soapy water.
  • With your screwdriver, detach the cover that encloses the lint trap and clean it thoroughly with a vacuum or a towel.
  • Get a toothbrush or cleaning brush to eliminate the debris out of the dryer.
  • Allow it to dry.
  • After it has been dried, reinstall the cover you cleaned earlier back to its place.
  • Reattach the lint screen also. After all these steps, then, your dryer is ready for use.

How To Replace Moisture Sensor On LG Dryer?

You discovered that your moisture sensor is faulty and you have been disturbed about how to replace it.

As a result, laundry has become complicated and time-consuming, and now, you have become tired of the whole situation.

What if I tell you that replacing the dryer’s moisture sensor in your LG dryer is very straightforward?

It requires no stress, and if you can follow the instructions below, the optimum efficiency of your dryer is 100% guaranteed. 

Here are the few steps you need to follow when restoring the faulty moisture sensor of your LG dryer:

  • Wear your protection kits such as eyeglasses, gloves, and so on because you’re dealing with an electrical appliance.
  • Unplug your dryer: The second step you must follow is disconnecting your dryer from the electric socket. Again, the reason is to prevent you from involving yourself in electric shock danger.
  • Locate the lint trap inside your dryer and remove the lint trap screen: Lint trap is the screen basket found at the downward section of your dryer’s door opening.
  • Three screws are holding the air vent; locate them and unscrew them with your screwdriver.
  • Another two screws are holding the moisture sensor circuit in place, lose them also with your screwdriver. 
  • Furthermore, you will see two wires as you pull the moisture sensor circuit. So, firstly, disconnect the two wires and remove the moisture sensor circuit from your dryer.
  • Moving forward, there are two moisture sensor bars inside the circuit.

    That means you will have to check if the two are working perfectly. If they’re not, you will buy two different moisture sensor bars because they sell them separately. 
  • The next step is to detach the moisture sensor bar from the circuit:

    Push the bar until it loses, separating from the hole that holds it, then use your screwdriver to get underneath the moisture sensor bar, and remove the sensor bar from the circuit. 
  • After the faulty moisture sensor bar has been removed, wipe the surface of the circuit with a clean towel before installing a new one. 
  • The next step is to put in the new moisture sensor bar: Insert the new bar inside its hole until the hole holds it firmly. 
  • Now, put the moisture sensor circuit back on the dryer. To do that, reconnect the two wires that you separated earlier, reattach all the screws also and reinstall the dryer lint screen back to its position.
  • And finally, your moisture sensor has been replaced successfully. Plug your dryer back and enjoy the efficiency of the new moisture sensor with absolute ease.

How Do I Know If My Dryer Is Going Bad?

Your dryer will give you one of these signs or even, all of these signs when it starts going bad.

If you notice any of the symptoms below in your dryer, then it’s already notifying you that it’s weak and due for replacement;

  • Dryer won’t start: When your dryer refuses to start, no matter how much you turn it on, you have checked all the vital parts and nothing is wrong with them; then, the dryer is old enough to be replaced.
  • The dryer becomes too noisy.
  • It begins to shut down in the middle of drying before completing its regular cycles. 
  • Inadequate heat, thereby making your clothes not drying appropriately.

How Long Does A LG Dryer Last?

With good maintenance, the average life expectancy of an LG dryer ranges from 10 to 15 years.

LG remains one of the best companies that manufacture and distribute quality electrical appliances worldwide.

Over the years, the company has proven itself to be a giant amongst others and has set a high standard for itself in the technological world.

Conclusion

This article encompasses everything you need to know to ensure the effectiveness of your dryer.

By now, you should be able to discover whatever it is that happens to your dryer if it’s not working correctly.

Likewise, you should be able to fix the problem by yourself within a short time and without any stress or difficulty.

Sharing is caring! Spread The Love!