Sidings are crucial additions in every home as they don’t only add beauty but durability, ensuring your house walls are well protected from harsh elements.
And amongst the several sidings available today, a Hardiplank is the most recognized and best choice.
However, since these Hardiplank boards and sidings are made with fiber cement, a long-lasting material, how can one hang things on them?
You can hang things on a Hardiplank siding by drilling screws into them. You can hang featherweight objects like flower baskets with little weight on the screw anywhere you wish. However, heavier objects shouldn’t be put directly on the Hardiplank, so use a stud finder to find a stud and drill holes into them for hanging heavy things.
How to Hang Objects on Hardiplank?
Regardless of whatever you wish to hand on a Hardiplank, lighting for decorations, flower baskets, or any other thing you choose.
Below is a step-by-step guide to direct you, but before that, the table below contains the tools you’ll need and their functions.
You can follow the steps below to hang your items/objects on Hardiplank.
#1. Step 1
Choose lightweight objects instead of heavier ones and hang them at eye level that will complement the Hardiplank, depending on the item.
If it’s a flower basket, you should drop them in a position that makes the flowers visible but not too down.
#2. Step 2
The first thing to do is select the area you want to hang the item. Use the stud finder to uncover a stud behind your siding.
Next, mark that spot with a visible marker or chalk to indicate the position of the screw installation.
It is advisable to position whatever nails or screws you use 3/8 in. away from the plank’s end.
#3. Step 3
Use your tape to measure the diameter of the item you wish to hang, separate that diameter into two parts, and add an extra three inches to your total.
Employ a hanging bracket with an extended length to ensure thy item isn’t placed beside the siding but vertically.
#4. Step 4
Set the hanging bracket on your HardiPlank at the area you’ve marked and alter it till it reaches your desired height. Mark these hole positions and set the bracket aside.
#5. Step 5
Wear safety equipment like safety glasses, nose masks, and ear plugs to protect you from loud noise and dust.
#6. Step 6
Make pilot openings at the marked locations to simplify the screw insertion and prevent breaking the Hardiplank.
#7. Step 7
Place the bracket openings to correspond with the pilot ones in your Hardiplank and add the screws. After that, use a screwdriver drill to fasten them securely.
#8. Step 8
Hang your desired item on the protruding bracket point.
Can You Screw Things Into Hardiplank?
It is possible to screw things into a Hardiplank, but you can only hang that thing directly on the board if they have a lightweight.
If not, it would be best to use the hanging bracket installed on the stud. Hardiplank’s manufacturer advises using corrosion-resistant, galvanized, or stainless steel nails and screws.
Using the appropriate tools when screwing things into your Hardiplank siding is essential as this guarantees your head screw will be in an exact position with the board after being set in place.
Hammering the nails or screw directly into the board is not advisable as it’s tough and requires maximum effort.
Hence, it would be best to use drills to insert these screws, and this process is much simpler.
Using screws that are not among the manufacturer’s recommended ones could cause problems for you.
It’ll end with the screws not placed evenly with the drilled holes or protruding from the bracket, but you can avoid this by sticking to the appropriate Hardiplank screws.
Blind nailing/screwing is the recommended installation technique for any screw insertion in a Hardiplank.
It involves subtly adding the screws to the sidings to make them invisible. Further, it is the preferred installation method for Hardiplank.
The Hardiplank sidings manufacturer adds a nail line to these sidings to simplify the installation procedure for you.
The nail lines added are the perfect guide to help you place the nail suitably to achieve a blind nailing technique.
Can I Drill Into Hardiplank?
It is possible to drill into the Hardiplank using the carbide drill bit, but it’s vital to be careful because even though Hardiplank is long-lasting, it breaks effortlessly.
Hence, endeavor to use the appropriate drilling materials and methods to avoid complications.
Below are steps to drill into these cement fiber sidings.
#1. Step 1
Gauge and draw on the area you wish to make the hole using a measuring tape. After that, mark those exact spots with a pencil or crayon.
#2. Step 2
Set the Hardiplank siding on wood support across a frame like a sawhorse for better positioning, and let it rest on them for support.
Make the marks for the hole drilling on the area left void between the sawhorses.
Do not skip this process, as drilling holes into the Hardiplank without supporting them can result in a snapped siding.
#3. Step 3
Fit a masonry drill into the power drill to make small holes on your board, and insert a bigger carbide drill to help you achieve large holes.
It would be best to use a saw designed for light concrete or fiber cement like the Hardiplank.
#4. Step 4
Align the tip of the masonry drill bit with the previously made hole marks and power the drill on to go through the sketch and create a fine hole.
However, only apply minimal pressure while you do this, as excessive torque during the drilling will cause the Hardiplank to split.
Can You Hang a Tv on Hardiplank?
You can hang a TV on the Hardiplank siding, but it won’t be placed directly on the siding due to its weight.
It would be best to attach it to a mounting bracket through studs.
Here are steps to guide you.
- The first step is deciding where you want your TV placed. After that, make the holes you want to drill and mark them with a pencil or chalk.
- Next, you can use studs or anchors. If you choose to use studs, you’ll have to use the stud finder to locate a stud and then drill the hole accordingly. For anchors, make holes in your pre-made spots and hammer in the plastic anchors for your TV, but do this gently.
- Afterward, fasten a bracket to the siding by drilling holes through the initial pilot holes and screw the bracket into place.
- Proceed to connect the mounting plate to your television and mount your TV on the plate.
- Lastly, secure the TV and follow the instructions according to your TV type. You may need a wrench to fasten bolts and screws to the TV bracket to ensure it’s placed tightly, and you’re good to go.
A Hardiplank is a durable siding used in most houses, and as conventional, you may wish to attach decorative items to them.
But to do this, you’ll need to drill holes, so be careful when doing this to avoid breaking them.
Remember that heavy objects should be attached to brackets while delicate items can be hung directly.