Everybody loves preserving their food items to consume them later, which is why over 100 million U.S citizens use refrigerators.
However, imagine your refrigerator makes spooky noises at unconventional times. Then, rather than assume your house is haunted, making inquiries isn’t a bad idea.
Your Kenmore Elite Refrigerator will only make noise when some refrigerator parts are damaged. These parts include the fan motors, the fan blades, the compressors, and the valves. So, fixing these parts will stop your fridge from making these noises.
Why is My Kenmore Elite Refrigerator Making Noise When The Door Is Closed?
If the door of your Kenmore Elite Refrigerator door is closed, and it is making noise, then the evaporator fan motor or condenser fan motor is faulty.
However, damage to the fan motors is not the only cause of your refrigerator making noise. Other parts of the fridge can cause a lot of noise when damaged; they are:
#1. The Fan Blades
The fan blade circulates cool air through the compressor coils of the Kenmore Elite Refrigerator by drawing the air from the front grille. The fan blades work in hand with the compressors.
There are two fan blades: the evaporator fan blade and the condenser fan blade.
Unlike the fan motors, faults in these parts can cause the refrigerator to make a lot of noise even when the refrigerator door is open.
These blades are located behind the back panel of the refrigerator. Turn the blades to check if the fan blades are faulty. If it moves without any obstruction, it is not defective.
However, if the opposite happens, you will need to take action immediately.
#2. The Water Inlet Valve
The water inlet valve is responsible for supplying water to the refrigerator dispenser and icemaker.
This component is faulty if the refrigerator makes noise when these two areas are filled up.
#3. The Compressor
The compressor serves as the central organ of the Kenmore Elite Refrigerator. It moves the refrigerant through the refrigerator system.
It also applies pressure on the warm part of the refrigerator circuit, making it hot.
The compressor is located at the bottom of the refrigerator. A failed compressor is most likely the cause of your refrigerator making clicking noises.
Since the compressor lasts for years, wearing off is possible.
Pull your Kenmore Refrigerator slightly away from the wall and listen carefully to check if your compressor has failed. If you hear clicking noises, then the compressor is faulty.
Moreover, you can check the temperature of the compressor to know if it is defective. Once it is above average, ensure you have the compressor removed.
How Do You Fix a Noisy Kenmore Refrigerator?
To repair a noisy Kenmore Refrigerator, you must first identify the fault. Then, as soon as you place the faulty part, you must take different steps to rectify the issue, depending on the component at fault.
Below are the possible defective parts of the refrigerator and how to fix them.
#1. The Fan Motors
If you discover the fan motors are faulty, you have to replace them instantly. These motors are not easily repaired, so it is advisable to replace them.
You can buy the EAU64824401 Evaporator Fan Motor Assembly or the 2315539 Refrigerator Evaporator Fan Motor. You can also buy the WR60X10220 Refrigerator Condenser Fan Motor.
#2. The Fan Blades
If you discover the fan blades are faulty, ensure you check the blades for pieces of ice.
Also, make sure there are no foreign materials on the fan blades as this would lead to your refrigerator making loud noises.
The best way to repair a faulty fan blade is to clean it with a soft brush. Note that you do not attempt this when the power is still on; if you do, you will end up getting electrocuted.
Thus, the first step you must take is disconnecting the refrigerator from the power source and cleaning it.
Cleaning the fan blades is not a guarantee of the noise stops. If the noise persists, endeavor to replace the fan blades.
You can buy the GE WR60X10205 Refrigerator Fan Blade.
#3. The Compressor
The compressor of the Kenmore Refrigerator may get dirty at some point. Once this happens, ensure you disconnect the refrigerator from the power supply.
Then, as with the fan blades, clean the compressor. After this, return the compressor to its rightful position and restore power to the refrigerator.
You can also vacuum the compressor to remove dust. If the compressor still fails after this, contact a licensed technician immediately.
Note that you do not necessarily need to replace the faulty parts of the refrigerator on your own.
Instead, I recommend that you employ the services of a licensed technician to analyze the fridge and replace the defective parts.
A licensed technician is a technician who is certified by the Environmental Protection Agency.
Do not employ the services of a technician if he does not have at least a Type 1 certification.
Other subsidiary parts of the Kenmore Elite Refrigerator cause the refrigerator to make noise when damaged.
Below are some of these parts and how to fix them in case of damage.
#4. The Icemaker
The ice maker is used to produce ice in the Kenmore refrigerator. Frozen water in the supply line can create clogs in the ice maker, which can cause a clicking noise.
Unplug the fridge and pour warm water over the supply line to defrost it to resolve this. If the clicking noises continue, replace the ice maker.
#5. Damper Control
The damper controls the airflow between the freezer and the refrigerator. The muffler does this by occasionally opening and closing, which directs airflow.
It would meet two things once your damper cannot open and close properly. First, the damper may be stuck, which causes a lot of noise. In this case, you can easily adjust the drag.
Second, the damper may be broken, and you will need to replace it immediately.
#6. Condenser Coils
The condenser coils function as cooling and condensing agents in the refrigerant. It is located at the bottom of the Kenmore Elite Refrigerator.
Over time, the condenser coils may accumulate a lot of dirt, which may cause them not to function correctly and generate noise.
You need to use a vacuum to clean up the coils to rectify this issue. However, if the dirt remains after using the vacuum, ensure you use a rag to wipe off the remaining dirt.
#7. The Start Relay
The start relay is a tiny device located on the side of the compressor. If the start relay makes a rattling sound, it is the cause of the noise and is considered faulty.
Once you realize the start relay is defective, you need to replace it immediately, or the compressor will not function properly.
Can My Noisy Kenmore Refrigerator Lead to Further Complications?
Though it is uncommon, if you do not check the noise in your Kenmore Elite refrigerator on time, it may lead to somewhat avoidable hazards.
For instance, if the compressor is faulty, it may lead to an electrical short, which may damage your refrigerator ultimately or cause loss of life.
Therefore, you must check your noisy Kenmore Refrigerator on time.
Conclusion
The next time you hear your Kenmore refrigerator making noise, ensure that you inspect it and fix any faulty parts.
Thus, always have your technician on standby if you need to replace the defective parts of the refrigerator.
