A washing machine is only called good when it works efficiently. The belt is the key material required to make a washing machine efficient.
It provides repeated motion in the machine. Repeated motion or spinning in a washing machine is very important.
Many washing machines come with a belt, while others have another means of providing repeated motion. So, does the Kenmore washer have a belt?
Kenmore washer has no belt. However, the Kenmore washer uses a direct drive washer for effective spinning. The motor coupling possesses parts that spin, which makes a belt unnecessary.
Do All Washing Machines Have Belt?
Not all washing machines have a belt. So even though this vital washing machine part agitates the spinning drum, some machines have alternatives.
While there are washing machines with no belts, there are also machines with up to two belts.
Nevertheless, a larger percentage of washing machines perform better without belts.
The revolution per minute of a washer without a belt is higher than that of a washer with a belt.
This means that a washing machine without a belt would spin better and thus perform more effectively.
Environmental factors such as temperature, humidity, and oil are contending elements of a belt in the washing machine.
For example, changes in humidity may not be favorable for the belt, as it may cause it to relax or contract.
On the other hand, the temperature may affect its heat absorption when in use. Oil will greatly affect the friction.
The belt will lose its friction and may not transmit energy very well. So there is a greater chance of machine failure with these factors being present.
Does A Kenmore 70 Series Washer Have A Belt?
A Kenmore 70 series washer does not have a belt. This series of washing machines have no moving parts within the washer.
Instead, it functions using electromagnets which are better than belts.
The Kenmore 70 series Washer is 3.5 cubic feet is same as a chest freezer used in homes.
In a single load, this series washing machine can hold up to 28 extra-large t-shirts.
It’s built with a very efficient triple action agitator, enabling it to perform at this rate.
Also, its top-notch spin has a 700 max spin cycle, which leaves clothes ready for the dryer.
In addition, belt motions cause vibrations to dampen as time goes on.
This results in less performance and thus, lowers the output level of the washing machine.
As a result, the revolution per minute drops, which may reduce the washing power of the washing machine.
In addition, belts may cause the direct rotation to change over time, causing the washer to be unstable.
Does A Kenmore 90 series Washer Have A Belt?
Kenmore 90 series Washer does not have a belt. However, it does have a drive clutch.
The drive clutch enables it to change speed when the washing machine is being used.
The speed of the drive clutch makes it effective in cleaning the clothes put in it.
Kenmore 90 series washer, without a loading machine belt, still performs excellently well using its drive as its loading machine belt.
A belt would make it seem like any other washing machine.
Another interest-provoking factor here, in the Kenmore series washer, is that it is less expensive.
This is because the series is preferred for commercial purposes, corporate housing, and apartments.
In addition, the way it is built ensures that it fits in without causing so much noise in the area.
The noise is reduced because it doesn’t have a belt, making it much smoother to work.
Where Is The Washing Machine Belt Located?
The washing machine belt is located at the bottom of the washer.
The belt in the washer is used in spinning the drum, which stirs the fabric in repeated motions during washing.
You should know that your washing machine belt can easily develop a fault.
The simplest or smallest fault could disrupt carrying out washing properly.
However the case, you can detect a fault with the belt when you notice improper running of your washer.
Another thing you must note is that, as you locate your belt, you must monitor its condition regularly.
As one of the major components of the washing machine, a belt is a vital tool in ensuring all other parts work well.
How Much Does It Cost To Replace A Washing Machine Belt?
It will cost you approximately $20 to replace your washing machine belt.
The price of changing the belt of your washer should not go beyond this price range.
Although, in very rare cases, prices may vary due to price changes.
Since the belt is not changed too frequently, I can tell you that this price is pocket-friendly.
When the belt begins to malfunction, it produces a kind of smell similar to burning rubber.
When this happens, it flaws the spinning and retards performance, and you should seek help from your technician immediately.
The performance of your washing machine belt tells you the current state it is in, whether good or bad.
When you notice the belt cannot spin well, it is clear that you should consider changing your washing machine.
The continuous use of a washing machine with a faulty belt yields negative results and won’t serve you well.
So, to utilize your washing machine, you should put the belt in its proper place and be well-conditioned.
You can only properly utilize your washing machine by always ensuring it is okay.
If you want to ensure high performance at regular intervals, you should replace your washing machine belt when necessary.
One thing I must say here is that you can easily change your washing machine drive belt.
Yes, it is a process that needs your time and a few tools.
Loading the washing machine belt is simply done by detaching your washing machine part by part until every part is placed aside.
After that is done, you will find the belt inside. Then you can replace it, recouple and then continue using your machine.
Nevertheless, it would be best if you let a professional carry out this process for you to avoid making mistakes.
A professional certainly knows his job better than you do. But, if you’ll still fix it, before you replace your washing machine belt, ensure you take proper precautions.
One proper caution you must take is disconnecting your washing machine from the power source.
It could be dangerous whenever you try replacing your washing machine belt when it is connected to electricity.
Water droplets may be in areas you may not notice. This could lead to a shock, and the effect could be catastrophic.
If you’re getting professional help and buying a new belt, varying prices differ regarding different washing machine brands.
The model of your washing machine may differ from another.
That means that you should check the manufacturer of your washer. Knowing this will save you from extra costs and set your expectations regarding replacement price.
Lastly, make sure you check on the belt for visible damages before changing the belt.
You may find noticeable damages such as fraying of the belt, holes, or tears.
When apparent damages at this point are spotted, you should seek to replace your belt as soon as possible.
If there is anything spoilt beyond repair in the machine, you should replace the washing machine.
When you replace the washing machine, you save the extra costs of constantly fixing it. And, you save yourself a lot of stress.
Conclusion
A Kenmore washing machine may not have a belt, but it works way better than a machine with a belt.
Even the Kenmore series washer (70 and 80) doesn’t work with belts.
There are so many advantages of using a Kenmore series washing machine.
First, it’s more efficient and quiet. A Kenmore series washing machine is definitely better than a regular washing machine.
