Many people have experienced this and still don’t know how to go about a refrigerator not freezing or cooling.
Some have, even though it’s so bad that they end up getting rid of their refrigerators.
Meanwhile, the causes of this issue might not even be as severe as they think, and sometimes it’s trickier than they think. So why Maytag refrigerator may stop freezing and cooling?
The Maytag Refrigerator might not be freezing or cooling because of a broken evaporator fan motor, frost build-ups, dirty condenser coils, malfunctioning start relays, and defective thermostats can cause this.
What Would Cause a Refrigerator and Freezer to Stop Getting Cold?
The following would cause a refrigerator and freezer to stop getting cold;
#1. Frost Build ups
Sometimes you could just pull an item out of your refrigerator and notice it looks like snow has covered the item? That is what frost looks like.
Excess frost build-ups are terrible because it causes congestion in the vents and coils of your refrigerator.
This occurs when the moisture comes into contact with the appliance’s coils. To prevent this, you should always keep the door of your refrigerator closed.
Ways opening the door introduces humidity that contains moisture, which turns to frost.
Always organize your refrigerator so you can find things easier and faster. This helps because you don’t have to open and close the freezer multiple times to look for something.
Again, avoid putting hot items immediately into the freezer. This can lead to humidity. Always allow the thing to cool before putting it into the freezer.
Not just that, you should dry up items too before putting them into the freezer to avoid moisture.
#2. Broken Evaporator Fan Motor
A broken evaporator motor would cause a refrigerator to stop getting cold because this fan draws cool air from the coils and circulates it in the freezer and then the fridge.
So, if this fan is faulty, there’s no cool air to circulate.
This works together with the compressor, and so, if this is broken, the compressor would attempt to run, but there would be a drop in the performance.
Hence, cooling becomes difficult because the compressor alone can’t do it all.
We all know the importance of a fan, even in our homes. When the fans are faulty, it is difficult to work. When it’s challenging to work, it becomes hot for us.
This is the same for a broken evaporator fan motor. What could cause the fan to break? Carelessness, frost, and extended use caused it to break.
#3. Dirty Condenser Coils
The cooling capacity of your refrigerator reduces. So dirty condenser coils would cause a fridge and freezer to stop getting cold.
You can find the condenser coils behind or under the fridge.
They are heat exchangers, and they cool the refrigerant and expel heat. This is the more reason why a dirty condenser could cause a lot.
Whenever you notice cobwebs and dust clogged up in the coils, you should expect the fridge to stop getting cold.
This is because the dirt on the coil makes it difficult for the coils to release the heat stored up.
This is an essential component in a refrigerator. So, when it is faulty, it affects the fridge.
Therefore, you should always check this component to remove any debris in it to avoid malfunctioning and blockage.
#4. Defective Thermostats
Most modern refrigerators and freezers come with a control feature: a thermostat. The thermostat is used for temperature regulation in the fridge.
Therefore, it controls the compressor, evaporator fan, and condenser fan.
When there is a problem with this thermostat, those components mentioned above cannot do their job of keeping the refrigerator or freezer cold.
To be sure that the thermostat is faulty, there’s something you can do to figure it out.
First, turn the thermostat from the lowest to the highest setting and wait for a click.
If you don’t hear a click, it is faulty and needs replacement.
#5. Malfunctioning Start Relays
The start relay provides power to the compressor. If this starts to malfunction, the compressor can’t work, and your refrigerator does not cool.
There are different signs of a broken start relay depending on the product. So it is advisable to check your manual.
The obvious sign that the starter relay is malfunctioning is the humming sound of the compressor.
Any time the start relay kicks the compressor on, there is always a click.
If the compressor doesn’t come on even when the start relay tries to start, the start relay will try again.
If the clicking continues repeatedly, it is a sign that the start relay is faulty and needs to be repaired or replaced.
Unfortunately, this also causes your Maytag Refrigerator not to cool or freeze.
How To Fix Maytag Refrigerators Not Cooling?
The surest way to fix a Maytag Refrigerator that is not cooling is to consult a professional. This person has the training to repair refrigerators and freezers.
However, even as an unprofessional, you can give it a shot to fix your Maytag Refrigerator by following these steps;
#1. Check Your Power outlet.
The first thing to do is make sure your refrigerator is plugged into a power source. What do I mean by this?
This might sound simple, but it’s something many people don’t know. Next, check if your power cord is still tightly fixed to the power outlet.
This is because it might get loose and cause a problem.
#2. Read the Product Manual
Secondly, take a look at your manual. Before picking up your toolbox to fix things, you should look at the manual first because the manufacturers might just write the solution there.
After all, they are the manufacturers.
Although most refrigerators have the same functions, each brand or model has different features, ideas, and solutions to various problems of their product.
So, do not say, ‘I had a refrigerator like this before, I can fix this.
The refrigerator you had before could be a different company, which could be another. Don’t use the knowledge of the other to solve the new one.
Every refrigerator with it’s manual.
#3. Inspect thermostat
Check your refrigerator thermostat to ensure that you have not mistakenly set it wrongly.
For example, you can set thermostat dials wrongly when items in the refrigerator bump on them.
By this, the temperature is set and changed. So always check your thermostat.
#4. Clean Condenser Coils
Clean your condenser coils that are stuck with refrigerant. These coils can become stuck with cobwebs, dust, and hair debris.
Instead, purchase a condenser brush and a vacuum to suck up the dirt from it. You should do this at least twice a year to avoid too much buildup of dirt in it.
#5. Unblock the Vents
Make sure nothing is blocking the vents. Cold air circulates through ducts that run from the refrigerator to the freezer compartment.
If items block the airflow, the temperature will be inconsistent, making your Maytag Refrigerator not too cool.
Also, the vents have different locations depending on the refrigerator model.
Check your manual to locate them.
Items are packed tightly in the refrigerator and frost buildup blocks the vents. To solve this issue, avoid overcrowding your freezer with food items.
Instead, for the frost buildup, unplug the refrigerator and allow the frost to defrost. This will take a while, but it’s worth it.
#6. Test the seals
Test the seals of your refrigerator. There’s a simple trick to do this. The magnetic seals on the doors could also be a problem when it gets brittle over time.
Put a dollar bill halfway through the door and close it. Try opening the door again; if there’s resistance, it is still very okay.
But if the dollar bill slips out quickly, you’ll have to replace the door gaskets.
The above discussed are the ways to fix Maytag Refrigerator, not cooling.
If you try all these and find out they’re all in good shape and your refrigerator is still not cooling, then you’ll need to call a technician to come to check it out. It is probably a more complicated issue.
Conclusion
Maytag refrigerators are efficient and durable.
However, one could notice that it’s not cooling anytime. It could be that the condenser coils are dirty or the evaporator fan motor is faulty.
There are so many causes of this, and there are solutions to them. Finally, always remember to consult a professional whenever you are in doubt about anything.
