A GE dishwasher can take care of the dishes, making your life simpler. Moreover, because you are most likely using your dishwasher regularly, you may encounter the control locks.
The safety lock on GE dishwashers prevents the user from changing the settings while the machine is running.
Again by pressing a series of buttons in a certain order, you can unlock the door. If it doesn’t work, a hardware reset might well be necessary.
The rinse aid lid and filter are two further examples of the lockable KitchenAid parts.
When you require clean dishes, you must unlock each component to configure the optimal wash cycle.
Press and hold the no-dry heat button for four proactive seconds to unlock the control panel on a GE dishwasher. The lock on the light should turn off as a result. Afterward, the dishwasher control lock should function normally.
Turning Off The Control Lock
#1. Locate The Dishwasher Control Lock Button
Each model has a slightly different button for the control lock press. The “Control Lock” button is a common feature on GE dishwashers.
If yours doesn’t have this button, look for “Control Lock” inscribed beneath the 4 Hour Hold options. Depending on the dishwasher, these buttons will be located either above or on the door.
If your dishwasher contains the “Proscrub Upper” and “Bottle Wash” buttons, you can test those options. However, most Kitchenaid dishwashers have a control lock button.
If you’re unsure which button operates the lock, consult the owner’s handbook if you have one. In addition, the model number of your dishwasher might potentially provide more information.
#2. To Unlock The Control Panel, Press The Lock Button For Three Seconds
Observe the red light next to the control buttons on your control panel. Before the light goes off, it may flash three times.
It’s only a good sign that your attempt was successful! Usually, you’d start a fresh wash cycle in your dishwasher when the light goes out.
Try them if you’re unsure which button is responsible for unlocking the door. Hold each one down for at least three seconds to test if the control light reacts.
Try another button if the first doesn’t work.
Suppose you’re confident that you hit the proper button, but the lock still won’t detach.
Depending on the situation, you may need to reconfigure the control panel or call a professional to fix your dishwasher, depending on the situation.
#3. Lock The Dishwasher By Tapping The Control Button
Deactivate the control lock using a four-hour delay or your preferred method of disabling the control lock. Keep pressing it until the red “Control Locked” light comes on.
While the dishwasher is running, the controls are locked, and you will not adjust the wash cycle options.
You can change the dishwasher settings if the control lock is on during a wash cycle. However, it is also possible to engage by mistake.
You can unlock the device by pressing and holding the related control lock button for a short period.
Changing And Restarting The Controls
#1. Identify The Buttons For Wash On The Control Panel
The dishwasher’s control is on the upper portion of the appliance’s door. Depending on the model, the available buttons may be different.
Look for a scrub or wash button marked “Hi-Temp.” Then click on “Heated Dry” or “Air Dry” to finish the drying process.
If you’re not familiar with operating the controls, check the owner’s handbook. Finding the wash and dry buttons isn’t too difficult for Ge dishwashers.
Ignore any rinse, hold, or option buttons on your machine during the reset.
#2. Press the wash And Dry Buttons Five Times In A Row
You can begin by pressing the high-heat wash button. Once you’ve pressed it, you may switch to the dry button. Try pressing the wash button only once before moving on.
Keep doing this until the diagnostic mode of the dishwasher comes on.
Start afresh from the beginning if you unintentionally hit another button. It is necessary to press both the wash and dry buttons simultaneously.
Do not wait too long, even if you don’t have to go quickly. Press each button sequentially to guarantee that the dishwasher reacts to your commands.
#3. When You Hear The Dishwasher Activate, Let It Run
Keep an eye out for the lock and other control panel display lights to flicker and turn off. Rebooting occurs as the dishwasher enters diagnostic mode.
Various sections, such as the heating elements, will activate. Wait a few minutes for the dishwasher to finish running.
The dishwasher’s software is thoroughly inspecting all of its components. At this moment, do not attempt to open the door or fiddle with the controls.
The lock light should remain off when the procedure is complete.
#4. If The Dishwasher Is Still Locked, Unplug It For One Minute.
Wait with the power cable pulled from the wall. If you can’t get to the power cable, you may also want to check your home’s fuse box or circuit breaker, usually located on the lower level.
Next, flip the kitchen and dishwasher power switch. Reset your dishwasher after one minute and see whether it works this time.
Fuse boxes and circuit breakers are frequently found in basements and garages. Alternatively, it might be concealed in a closet or other out-of-the-way area.
The fuse box and circuit breaker switches are marked in most cases.
Flipping different switches until you discover the one that controls your kitchen may be the only way to identify it if it isn’t marked.
You can also turn off your home’s energy using the large main switch.
A malfunctioning circuit board is the most likely cause of a malfunctioning dishwasher door and control panel. A repair professional can provide more guidance.
Ensure that all parts are in position and make sure there is enough room for the rinse arms to move freely.
A minor issue, such as the washing racks being out of alignment, might cause the machine to become unresponsive when locked or unlocked.