Washing Machines are great as they help to make laundry more efficient. However, sometimes after prolonged use, you may begin to notice some abnormal sounds.
So, if your washing machine is making such sounds, a grinding noise to be exact, you may wonder what causes it.
Loose drum-bearings, a trapped item, an unbalanced load during the spin cycle are some of the reasons your washing machine is making a grinding noise. Sometimes, the noise could be a continuous clicking sound or a high-pitched squeal during use.
Why Is My Samsung Washer Making A Grinding Noise?
It is usual to hear a grinding sound if you spin the tub with your hand. This sound is caused by the steel balls in the VRT system.
Samsung washing machines are usually quiet during operation. However, when it makes noises, you should listen carefully as the type of noise it makes could be expected or could let you know what the problem is.
From the guide below, you can read through the various noises to tell which your Samsung washer is making.
This sound could also be rattling instead. It is repetitive in a rapid manner. Usually, two metals are hitting against each other. When this noise keeps occurring throughout the cycle, it is best for you to:
- Check the washer level
- Also, check if anything is hitting against the body of the washer, it could be the drain hose.
- Empty the tub and check inside for loose objects.
During operation, the drain pump makes a sound similar to this. It occurs intermittently, but check and clean the debris filter if it occurs during every cycle.
Sometimes, this sound may be muffled. Movements in the washer usually accompany it. This sound is entirely typical when large items like bed sheets are washed. And in other cases, you would need to;
- Confirm if the washing load is balanced.
- In front-load models, check that the shipping bolts are removed.
If all these issues persist after you have done the necessary checks, request the services of a skilled technician.
Although some noises are normal during operation like; Quiet humming or buzzing(occurs during drainage), Loud humming (occurs when the home water supply valve is not open and the washing machine isn’t getting water),
Beep at the start of filling (sound of the water valve opening), Click followed by a short thumping (caused when the clutch in the washer’s motor is transitioning between modes).
Why Is My Washing Machine Making A Grinding Noise And Not Spinning?
When your washing machine does not spin and makes a loud grinding noise, it means that the drive pulley is damaged. After some years of use, the drive pulley tends to become worn out, bent, or cracked. When your washing machine is not spinning, it means this belt has broken, and the pulley needs to be replaced.
A couple of other factors may also cause your washer to make a grinding noise and not spin. These factors include:
1. Motor coupling failure
You can find the motor coupling in some top-load models. It is the part that is connected to and also protects the drive motor and transmission by failing if the washer is overloaded.
When your washing machine makes a grinding noise, it is possible that the motor coupling has failed to prevent damages caused to the transmission and drive motor. Again, replacement is the best option.
2. Defective tub bearing
Another factor that could cause your washing machine to make a grinding noise and not spin is when the tub bearing has worn out. This can be caused by overloading and using harsh detergents. Again, an expert should replace this part.
What Does A Washing Machine Sound Like When The Bearings Are Missing?
Usually, the washing machine makes a low buzzing sound during operation. However, if the bearings are gone, your washing machine would sound louder during use. Sometimes, you are likely to hear a banging sound as the inner drum, which is already loose, rattles around inside the machine.
Likely, the main tub bearing is faulty if the drum spins unevenly or rubs against each other, making a loud sound. However, if the noise made by the bearings is a squeaking noise, it is possible that all the bearings need is proper lubrication with mechanical grease. This would make the sound go away.
Sometimes, you should tighten the bearings as they may not have gone bad. To be entirely sure its bearings have gone bad, it is advisable to open the back panel of your washing machine and check the engine area.
When the motor has begun to rust, it indicates that the washer bearings have been damaged or fallen off.
How To Know When Your Washing Machine Bearings Have Been Damaged
When your washer becomes louder than usual when you turn it on, it means the bearings have gone wrong.
The inner drum may be loose, and when this happens, it rattles around in your washer, loud enough for you to hear the sound. Your washing machine may begin to vibrate on the wall with force.
Washing machine bearings tend to wear out over years of use. However, bearings can serve for about ten years or longer, and this depends on how frequently you use the machine or how often maintenance is done on your device.
However, on rare occasions, the bearings on the washing machine may wear out quickly. This is dependent on the machine’s brand and model.
Is It Safe To Use A Washing Machine With Noisy Bearings?
Yes, it is safe to use a washing machine with noisy bearings, but it is also best to limit it and not use it as frequently as before until the bearings are replaced.
Although, in no time, water would begin to drip from the seal, which makes the bearings rusty. And the faulty bearings will cause damages to parts of the washing machine like the basket, shaft, and other electrical components.
When you’re ready to change the bearings, this creates additional expenses as you may have to replace one or two more parts.
If you aren’t ready to take the option of getting a new machine or replacing the bearings, there are a couple of other options you can choose from to keep your machine running a little longer. They include:
1. Applying Grease
One of the most accessible parts of your washing machine is the bearings. It is straightforward to find, remove and apply grease on them. However, it’s best only to make use of an approved lubricant.
2. Repairing The Bearings
Repairing bearings are an excellent way to save money compared to replacing them. If this task is challenging for you, you may hire an expert to do the job.
These options are not effective for an extended period; in the long run, the need to replace the bearings or invest in a new washing machine may. Also, judging by how old the machine is, it is best to get new bearings. Doing this gives you the peace of using a normally operated machine.
How Much Will It Cost To Replace Washing Machine Bearings?
Replacing washing machine bearings doesn’t cost a fortune. Instead, it costs between the estimated amount of $150 -$300, workmanship inclusive.
Depending on the model of the machine, your location, and the person whose services you employed, it may be more expensive, that is, over $300. For example, replacing the bearings of top-loader models cost more than the front-loading models.
When replacing your washing machine bearings, You should consider the following factors:
1. The Machine’s Age
How long has your machine been in use? Is it relatively new, or has it been used well for years? An old washing machine will less likely benefit from a new bearing as it has only some years to live.
This factor can also be linked to the age of the machine. If the warranty is still valid, money can be saved when changing the bearings.
3. Level Of Use
Do you have a laundry routine? If you use your washing machine daily or weekly, it is best to replace the bearings as soon as possible.
Is It Worth Replacing Washing Machine Bearings?
Replacing the bearings in your washing machine is not a waste of resources. You may choose to replace it yourself, which is relatively cheaper than employing the services of an expert.
Furthermore, consider the number of years you’ve used your machine before purchasing new bearings. If the washing machine is not old, it’s best to buy new bearings at a low price.
A bad or worn-out bearing is one of the significant causes of your washing machine making a grinding noise during operation.
When you hear sounds coming from your washer, which doesn’t seem normal, open the back panel and do the necessary checks in the engine and around the machine’s body, if you don’t notice anything and the sounds continue, request the services of an expert to rectify the problem.