Have you ever tried to heat food in a microwave and realized the display unit wouldn’t come on? Or do you wonder why the clock goes off when you set the time?
The worst scenario is if you are tired and want to warm some takeout. Well, these things happen.
These problems are common to microwaves that have one malfunction or the other. Fortunately, there are a few ways to fix the problem.
Whirlpool microwave clocks will not work if the display unit is faulty. Sometimes it could be from a minor circuit problem, or the panel needs to improve. On the other hand, it could be the control panel’s fault. Consequently, you must change the parts. However, sometimes, you would have to replace the entire board or the microwave.
This article explains why your whirlpool microwave clock will not work and how to fix the problem.
Hopefully, you will know how to discover, fix, and get your microwave back to normal.
Why Is My Whirlpool Microwave Clock Not Working?
Your whirlpool microwave clock may not function because of some reasons. Sometimes, it could be a minor problem; other times, it could be complete damage.
Whichever way, it is best to figure out the possible reasons before you can find the solution.
Here are the reasons why your whirlpool microwave clock is not working.
#1. Microwave Not Connected to Power
The first thing to check if your whirlpool microwave clock is not working is if it is in line with power. It is common to forget that you unplugged it after previous use and failed to connect it.
Consequently, you might get home the next evening with some pizza and press the power button without a response.
At first, you might be flustered. However, you must confirm the power before checking anything else.
If you have a large family, your kids might be the culprit in such cases. One of your kids could have knocked out the cable from the socket while playing hide and seek.
After all, kids can be clueless about these things. However, it would help if you did not fail to caution them to avoid electrical appliances.
#2. Faulty Display Unit
The display unit is responsible for showing every command on the microwave. And with it, you can review the settings and know when the microwave is working.
When you turn on the microwave, it shows ON, and if you turn it off, it shows OFF before shutting down.
Apart from these features, you can also see the settings on the board as you change to your preferred timing.
For instance, if you wish to warm some pizza, you might only need to do so for five minutes. It would help if you pressed the buttons on the microwave to display numbers to set the clock.
The clock, in turn, alerts you when the pizza is ready to eat. But, of course, if the display unit is functioning, you will be able to give the microwave a command it will project.
#3. Faulty Control Board
The control board is the source of giving commands to the microwave. This part of the microwave is the main reason why you can set orders, and it will be displayed.
It contains various buttons, ranging from numbers to a few words. A whirlpool microwave has numbers 1-9 and a few other commands.
For example, popcorn, pizza, defrost, potato, preheat, soften/melt, cook, cook time, cook power, timer and clock.
These, put together, provide a user-friendly experience that only whirlpool appliance lovers can enjoy
Now, if the control board is faulty, it means that you cannot operate the microwave. .unfortunately, when you press the buttons, the display panel does not turn on.
The display panel and the control board work hand-in-hand to make the microwave easy to operate.
Unfortunately, if they are faulty, you must do something about it as soon as possible. It would be best to keep reading to discover ways to fix your whirlpool refrigerator clock.
#4. The microwave Needs a Reset
Electrical appliances are prone to acting up if there is a power surge or improper connection. This problem is common and requires a little to get them running correctly.
For instance, your microwave might not respond to commands because it needs you to reset it. Sometimes, you can disconnect it from the power source, which solves the problem.
Other times, you might need to do a normal reset process. Do not worry; I will share the whole process as you go further.
But it would help if you reset the microwave after you try to operate it, which is not functioning.
How Do I Fix My Whirlpool Microwave Clock?
After discovering the problems, the next thing is to fix them. As I promised earlier, I will share detailed steps to follow to revert the whirlpool microwave clock.
However, I will present the solutions according to the problems above. Consequently, these are the solutions I will explain in detail.
- How to fix a microwave that is not connected
- How to fix a faulty display unit
- How to fix a defective control board
- How to reset a microwave
Now, let us consider them one after the other.
#1. How to Fix a Microwave That Is Not Connected?
So far, this problem is the simplest. The reason is that it would take no effort to connect the microwave back to power. It does not require assistance or help.
Here are a few things that you must do.
- Take the power cable and connect it to the socket.
- Turn the socket on and wait for a few seconds.
- Finally, press the power button on the microwave, and everything should work perfectly.
#2. How to Fix a Faulty Display Unit?
A faulty display unit will get you nowhere with your cooking and frustrate you. To fix this, follow these steps.
- First, confirm that the power is connected and the microwave is on.
- Then, proceed to examine the control panel. You might wonder why this step is necessary.
- It would help if you knew that the control panel controls what the unit displays.
- However, ensure to disconnect the power source before you examine the control panel.
#3. How to Fix a Faulty Control Board?
Now, this step is quite technical. It may require a professional because of the many risks involved in this process. For instance, you might damage an essential panel part or get electrocuted.
- First, turn off the microwave and disconnect it from the power source.
- Next, wait for the residual current to move from the capacitor to avoid problems. You can do this manually; check the manual on the process.
- Afterward, unscrew the panel and remove the board. Observe if there are burns or indications of damage and replace the board.
#4. How to Reset a Microwave?
To do this:
- Press the power button for about three seconds.
- Please wait for a moment and disconnect it from power.
- Afterward, connect it back and check it out.
How Do I Turn Off the Clock on My Whirlpool Microwave?
You can turn off the microwave clock in three easy steps.
- First, locate the zero button on the control panel.
- Then, press it for three seconds.
- Afterward, release the button, and the clock goes off, but the time is intact.
However, this action does not restrict you from cooking with the microwave or performing other functions.
You can continue maximizing your electrical appliance without interruptions. Although, you will be unable to view the timing on the display panel.
Now, I know that you may wonder about the differences between the control panel and the display board. After all, they seem to perform the same function.
Well, with further ado, I will highlight a few differences in the table below.
Differences Between Control Board And Display Board
Control Board | Display Board |
---|---|
It controls the entire microwave. | Displays the commands you enter. |
It has a few buttons for giving commands. | It has a screen to view the settings. |
The microwave cannot function without it. | It can hinder the user from seeing commands. |
How Do I Set the Clock on My Whirlpool Microwave?
Setting your whirlpool microwave clock is easy peasy. You do not require any particular skill or expertise.
Ensure your microwave has power and the display unit is working. After you ascertain these essential things, you can proceed.
Here are the steps to set the clock on your whirlpool microwave.
- First, press the clock button on the control panel. This action makes the time on the display panel begin blinking.
- Next, input the correct time and press the clock button again.
- The time will stop flashing and stay in place. If this happens, you have successfully set the clock on your whirlpool microwave.
Final Thoughts
In conclusion, your whirlpool microwave might not work because of a problem. However, it is close to the display panel or the control board.
Sometimes, it may need a reset. Once you fix the problem, you have nothing to worry about. Fortunately, this article contains everything you need to know and do.