Frigidaire affinity washers are highly efficient and give you a fantastic washing experience.
However, for some reason, many believe that washers are self-cleaning. This belief prevents cleaning and makes washers accumulate moisture buildup and become dirty over time.
And, if washers become dirty, it directly affects your cleaning experience.
Hence, you must know how to run a clean cycle to prevent your Frigidaire affinity washers from dirt and foul odors.
To run a cleaning cycle on a Frigidaire affinity washer, first, ensure that there’s nothing inside the washer. Then, put some bleach or washing machine cleaner inside the washer’s detergent compartment, and turn on the washer. Press the “spin speed” and “options” buttons simultaneously until the washer’s screen displays “cln.” Then, press the “start” button, and the cycle will begin.
In this article, I’ll explain how to run a clean cycle on a Frigidaire affinity washer and the factors that can cause it not to work. By the end, you can perform the clean cycle yourself without stress.
How to Run a Clean Cycle on a Frigidaire Affinity Washer?
Running a clean cycle on a Frigidaire affinity washer is simple and doesn’t require much effort and time.
All you need to do is to follow the instructions below:
- First, connect your washing machine to a power outlet.
- Next, ensure that there’s nothing inside the washer, such as clothing.
- Next, put some bleach inside the detergent compartment, such as a cup of liquid chlorine or tide washing machine cleaner.
- Turn on the washer.
- The next step is to hold the “spin speed” and the “options” buttons simultaneously.
- As you hold both buttons, wait for a few seconds until “cln” appears on the washer’s display screen.
- Then, press “start” to begin the clean cycle.
- Remove the detergent drawer from its compartment and clean it with warm water and diluted chlorine bleach.
- Also, while cleaning the detergent drawer, remove the detergent inserts and clean them thoroughly.
You must also clean the outer part of your washer for a deep-cleaning session and achieve an impressive cleaning.
To clean the exterior of your Frigidaire washing machine, use a small damp cloth and mild soap.
If there are any stains or humidity buildups, eliminate them using non-abrasive cleaners such as diluted chlorine bleach or white vinegar.
You should note that both bleach and white vinegar have their respective functions.
White vinegar is more helpful in eliminating tough mineral deposits and soap sludge, while bleach doesn’t only help you clean but also kills bacteria and eliminates mildew and mold.
You see, just like other washing machine models, Frigidaire doesn’t clean itself.
Therefore, to prevent your Frigidaire washing machine from being dirty and emitting a foul odor, it’s recommended to clean it once a month or after every 50 wash cycles.
Frequent cleaning of your washer doesn’t only keep it tidy, it also gives your washer some refreshing smell and prevents your clothes from smelling bad even after washing them.
Also, keeping your washer’s lid open for a few hours after the cleaning or whenever you’re not using it is advisable.
You may be curious about the differences between a washing machine’s clean and standard wash cycles.
Thus, check the table below to learn about the differences.
| Clean Cycle | Standard Wash Cycle |
|---|---|
| The aim is to clean the washing machine itself. | The aim is to clean dirty clothing. |
| It uses a higher amount of water | It uses a lower amount of water. |
| There’s minimal agitation during the cycle. | There’s higher agitation during the cycle. |
| The wash temperature is lower during the clean cycle. | The wash temperature is hotter during the standard wash cycle. |
| The wash action speed is lower in the washer’s clean cycle. | The wash action speed is faster in the standard wash cycle. |
Why Is My Frigidaire Affinity Washer Clean Cycle Not Working?
Wanting to clean your Frigidaire Affinity washer only to discover that the washer’s clean cycle is not working can be disturbing and disappointing.
However, the problem may be occurring due to a simple reason.
So, check out your washer’s manual to discover the reasons that may cause the washer’s clean cycle not to work.
However, if you need help finding out the cause of your washing machine’s clean cycle not working even after checking the manual, then this is for you.
Below are the most likely reasons your Frigidaire clean cycle is not working.
- There’s a clothing item inside the washer.
- Faulty control panel.
- Faulty drive motor.
- The spin basket or the outer tub bearing is causing excessive friction in the washer’s drive system.
Leaving behind clothing items inside the washer while performing the clean cycle can cause damage to the washer.
So, ensure that there’s nothing inside the washer before beginning the clean cycle.
Also, If your washer’s control panel is faulty, it affects its operation. So, check if the control panel is free from damage.
Furthermore, a faulty drive motor can cause your washer’s clean cycle not to work. Therefore, inspect the drive motor for any damages.
If your Frigidaire affinity washer’s clean cycle is not working, you first need to troubleshoot the problem yourself, and the first troubleshooting step is resetting the washer.
To reset your Frigidaire Affinity washer, follow the instructions below:
- Then, hold the cancel button or any key from the washer’s control panel for some seconds until the washer shuts down and restarts.
- Select a new cycle.
- Then, press the “start” button to begin a new cycle.
Another way of restarting your Frigidaire Affinity washer is to follow the below instructions:
- First, ensure there’s no clothing item inside the washer.
- Turn off the washer.
- Disconnect the washer from its power source.
- Wait for 15-30 seconds.
- Then, plug the washer back into its power supply source.
- Turn on the washer.
- As the washer turns on, press any two buttons on the washer simultaneously.
Any of the two methods above will reset your Frigidaire Affinity washer, and usually, resetting should solve the problem of your washer’s clean cycle not working.
However, suppose the problem persists even after resetting the washer; inspect any of the abovementioned parts.
In that case, i.e., the control panel, drive motor, spin basket, and outer bearing, for damages.
You should contact an expert for professional assistance if nothing is wrong with any parts.
What Does Tub Clean Mean on a Frigidaire Affinity Washer?
Tub cleaning on a Frigidaire affinity washer means cleaning and freshening the tub of a washer.
A washer’s tub loads your clothes whenever you want to perform a wash cycle.
Tub cleaning is essential in a washing machine as it refreshes your washer and keeps it clean. It’s referred to as a system clean or clean washer in some models.
Furthermore, tub cleaning ensures that your washer operates optimally by eliminating detergent residues and moisture buildup and also helps to elongate your washer’s lifespan.
Most people believe that washing machines are self-cleaning, which is not valid. If you want your washer to be free from dirt and foul odor, you need to be cleaning it often.
Frigidaire recommends that you clean your washer every 50 cycles or once per month.
A dirty washer can cause your clothes to smell bad even after washing them.
Meanwhile, tub cleaning in washing machines is effortless and straightforward.
Therefore, follow the instructions below to clean the tub of your Frigidaire washing machine:
- First, select the clean tub cycle.
- Empty the washer’s tub, as any clothing items inside the washer can lead to obstruction during the cycle or can even cause damage to the washer.
- Put 1 cup of bleach, such as diluted chlorine, or one pouch of tide washing cleaner.
- Note that you can’t use bleach and tide washing cleaner together as it may be too harsh and can peel the tub’s interior.
- Then press the “spin speed” and the “options” buttons simultaneously.
- Then, press “start” to begin the cycle.
- Alternatively, press “start” immediately after adding bleach to the tub to begin the clean cycle.
- So, once the clean cycle ends, follow up with a rinse and spin cycle.
- After the whole cleaning, open the lid of the washer for the remaining water to dry out and to ensure that the washer’s interior receives some fresh air.
How Does the Clean Washer Setting Work on a Frigidaire Affinity Washer?
Once the clean washer cycle begins in a Frigidaire affinity washer, water fills the washer’s tub to a water level higher than in a normal wash cycle.
It ensures that the cleaning and rinsing reach the higher parts of the washer to get a good cleaning result.
Also, while the clean washer cycle continues, some agitation and thorough spinning will occur.
The process shouldn’t cause any panic, and it’s even a sign that your washer is working as it should.
The purpose of the cleaning cycle is to keep your washer clean and prevent it from emitting bad odors.
