Skip to Content

This is How To Keep Tension Rods From Falling Down!

Sharing is caring! Spread The Love!

How do you feel when the tension rods you have installed in your house continuously fall each time they shake? So frustrated?

Well, you don’t have to deal with that anymore if you like because this article gives detailed solutions on keeping tension rods from falling again and again. 

To keep tension rods from falling, they are a few adjustments you have to make to your rods. Read on to find out more information.

To keep tension rods from falling, use grommet tops and headings to hold your curtains, or you can clean out your windows. Alternatively, you can upgrade or replace your rods. While window frames can become loose due to the accumulation of dirt and debris, the type of materials used in holding curtains can also cause them to fall. 

How Do I Make My Tension Rods Stay Up?

This is How To Keep Tension Rods From Falling Down!

There are a handful of quick fixes for a falling tension rod. While some may work, others may not and will require a little professional help.

Here are a few. 

#1. Create Additional Friction

Tension rods are made with plastic and rubber materials. These materials have very soft and moist surfaces and have a very weak adhesive with tiles and glass.

To enhance the friction, glue the rubber shelf lining materials at the end with solid glue containing contact cement.

When the liners are tightened or compressed, the tension rods become stiff and solid and stay in place.

#2. Secure The Tension Rods By The Ends

Drywalls cannot hold curtain rods because they are likely to crack and even split.

It would help if you made your closet pole with wood or bought an already made pole from a store, particularly one that sells home appliance products. 

The closet pole usually requires a single screw board into the plastic closet pole. The pole may carry any shape, provided the drill opens wide enough for the rod to pass through.

You can also paint the walls to blend in with your wall’s colors so they can have a beautiful finishing touch. 

#3. Secure The Middle

Another way to make your tension rods stand up is by securing the middle. First, you must bring down the rod and loose out all the edges to increase the spacing between the two endings and the walls.

After this, replace it firmly on the walls and allow it to stand. You can also use duct tape for added rigidity. 

#4. Use No Drill Adapter and Rotating Curved Shower Rod

The drill adapter helps to tackle home décor issues like falling tension rods. They help to secure tension rods on hard surfaces like tiles, stones, and even drywalls.

Why Does My Tension Rod Keep Falling?

The common reason your tension rod keeps falling is if it holds too much weight.

Typically all tension rods should hold only about 10 to 30 pounds which entirely depends on the strength and the material it comes with.

However, there are many other reasons why your tension rod keeps falling, so let’s dive right in. 

#1. The Quality of The Tension Rod Material

Your tension rod will drop if the quality material used for your rod is either cheap material or of poor quality.

The solution is replacing your rod with high-quality, strong materials that stay in place when hung up. 

In addition, you can purchase a tension rod with anti-sliding properties to enhance your rod’s sturdiness and give you a rest of mind without fear of having your rod tumble on you when you have a bath or want to slide your curtains.

#2. Faulty Shower Hook

A faulty shower hook could also be a culprit for why your tension rod keeps falling.

Sadly, sometimes constantly tugging on your shower curtain when you open and close the curtains, it won’t take long before the shower rods become weak. 

A weak rod will often have visible rust or get stuck in a particular hole or angle on the walls of your bathroom or windows.

You should purchase a rod with double hook features, perfect double gliding features, and anti-rust properties.

These rods are solid and resistant to heavyweight for a reasonable time before they begin to wear and tear.

#3. Smooth Wall Surfaces

Drywalls could look like a solid surface for holding screws and tension rods. However, tension rods don’t do so well with smooth surfaces, which drywalls are.

Eventually, installing your tension rods on the drywall will cause it to fall all the time because there is no support system for the rod. 

You can always use wall anchors or bore mounting screws into the walls where you want to install your rod.

They may not be as strong as expected or be able to hold so much weight, but they are an excellent alternative fix for the tension rod.

Here are a few pro tips to consider for why your tension rod keeps falling.

What Can I Use as Support For Tension Rods?

No one wants their curtain or window rods to fall on them each time they touch or slide them.

Sometimes replacing the rods or upgrading them to one with a more sturdy material is always the best option, but not the only option for creating additional support for tension rods.

You may ask then, what can I use to support my tension rod? We have listed a few. 

  • Purchase only tension rods with anti-sliding properties to enhance the sturdiness and firmness of your tension rods
  • You can also use adhesive holders and rod retainers to support your tension rods.
  • Using magnetic attachments to the ends of your tension rods helps in keeping your rods attached firmly to the walls. 
  • Purchasing a shower hook with double hook property, a double gliding feature, and anti-rust properties helps maintain support on all your tension rods.
  • Using wall anchors or bore mounting screws into the walls and hanging your rods on them helps prevent excessive gliding and sliding.
  • Since tension rods are a product of plastic and rubber materials, both of which have weak adhesive force with dry walls, hence the reason why they constantly fall from their positions in the walls. You can enhance the support of the rods by using solid glue to glue the plastic and rubber materials to the walls by their ends.  
  • Homeowners can also use duct tape on their rods for additional support, which is quite effective sometimes. 
  • No drill adapter + rotating curved shower rods are also very effective for supporting tension rods. They deal with minor home décor issues such as falling tension rods. In addition, they help to secure tension rods on hard surfaces like stones, tiles, and drywalls.

How To Fix a Broken Rod?

A tension rod is one of the delicate home décor products, which is also relatively cheap.

As expected, you may want to throw them out immediately after they break because you can quickly run to the store and buy a new one. 

Interestingly a broken tension rod can be fixed using simple DIY steps from the comfort of your home.

However, before fixing a broken tension rod, you must first diagnose where the fault is because, most times, the culprit of a broken tension rod is a loose or snapped innerspring. 

When tension rods get broken, they fall all the time. Hence it is very frustrating and uncomfortable, especially when it keeps getting in the way you run your activities in your home.

Here is what you can do to fix a broken tension rod: Take down the rod and unscrew it.

Then expand it so it is longer than the walls you place them on. Then cut out the broken part if possible, but even if it is not, you can use duct tape to wrap it around so that it stays together.

 Alternatively, you can use strong glue such as two-part epoxy or cement glue to hold the rods in place.

The method is quite an effective one. It helps you fix your tension rods until you are ready to replace or upgrade them properly.

Final Thoughts

Tension rods are crucial for home décor purposes. However, they may break or get installed incorrectly, leading to the rods falling continuously.

Fortunately, You can fix this issue conveniently by using duct tape, cement glue, and a rod retainer to hold the rods together.

The material used in making the rod, faulty shower hooks, and drywalls or hard surfaces are culprits for falling tension rods.

Sharing is caring! Spread The Love!

Leave a comment

Your email address will not be published.