Last updated on August 14th, 2022 at 01:25 pm
Manufacturers of the rejuvenating claim that it is a polymer that makes old kitchen cabinets look as good as new as it restores their shine and luster while cleaning these wooden surfaces.
All these things said about rejuvenating are not lies, but rejuvenation leaves a cloudy film on your surfaces like other floor finishes.
Due to this, many people usually opt for removing these rejuvenates as it can be a very tasking job if you do not have proper knowledge on how it is done.
In contrast, others strongly believe that rejuvenation cannot be removed once applied.
Suppose you belong to the second category of people, luckily for you. In that case, there are various ways you can get rid of rejuvenation, and one of the most used methods is using an ammonia-based cleaner or a floor stripper.
Can Rejuvenate Be Removed?
Yes, you can remove rejuvenation. Did you apply it to rejuvenate your floor surfaces, and not is it coated in a waxy, streaky, and hazy film?
Don’t be bothered because you can get rid of rejuvenation in a few minutes buy=y just following a few simple steps carefully; you shouldn’t panic because rejuvenation does not ruin your floors.
Usually, rejuvenates are not supposed to leave a hazy film trace on your floors, but instead, they are supposed to do the opposite.
The cloudy residue that rejuvenates left behind shows that something is wrong somewhere.
Some reasons you rejuvenate and leave behind that hazy residue might be because of these reasons.
#1. Your Floor Material Is Not Suitable for The Rejuvenate
The most common reason why rejuvenate does not work on certain floor types is that you might have used rejuvenate floor restorers on an incompatible surface.
These surfaces have a waxed or oiled floor or used a rejuvenate product that is incompatible with your floor type.
For example, let’s take the all-floor restorer; it is suitable for sealed surfaces like ceramic tile, laminate hardwood, linoleum, and marble tiles at least five years old already.
On the other hand, the rejuvenate crime rejuvenate shine refresher is suitable for newly laid floors that can be less than five-year-old, and the wood floor restorers are designed majorly for just sealed wooden floors.
#2. You didn’t Clean the Floors Properly
Another reason why your rejuvenate might not have been working is that they were applied on dirty surfaces.
Always ensure that you clean your surfaces properly before applying to rejuvenate because if you do not, the rejuvenate would trap the dirt inside it and seal it in permanently.
You applied other oils before applying the rejuvenate; make sure that you clean the previous oil off properly before applying your rejuvenate so the product can adhere properly.
After applying to rejuvenate, ensure that you clean the floor only with an oil-free purpose cleaner.
#3. Using Too Much Product on Your Flooring
Another possibility is overusing the product.
Some people tend to use a larger amount of rejuvenation to ensure a cleaner surface, but in actual sense, overusing this product does more harm than good to your floors.
One 32oz bottle of rejuvenating floor restorers can cover up to 650 square feet of floor.
So too much use of the product can cause it to form a hazy mist on your floors.
#4. Making Use of Steam Mops
You should note that steam mops and rejuvenate do not mix.
You shouldn’t be applying your rejuvenate while using a steam mop because these mops tend to loosen the rejuvenate product, which may later lead to the appearance of smudges and streaks on the flooring.
#5. Applying On Wet Surfaces
You should ensure that your floor is completely dry before applying your rejuvenate cleaner.
Likewise, after applying the rejuvenate, you should also make sure that the surface is dry for a stipulated period before stepping on it.
You have already made one or more of the mistakes listed above, and you would want to rectify your mistake.
You can also do that by using the right cleaners like the zep hardwood and laminate floor cleaners, suitable for laminate floors and wooden surfaces, or the zep heavy-duty floor stripers, suitable for rubber vinyl and no-wax tiles.
Zep has been tested and confirmed in the past to be highly effective, so you wouldn’t have any regrets about using any of them.
Is Rejuvenate Good for Wood Cabinets?
There are rejuvenates made for cabinets and wooden furniture like the rejuvenate cabinet and furniture restorer fills.
This rejuvenation is designed to be applied on sealed wooden surfaces and furniture surfaces for you to restore their original shine.
I highly recommend using this rejuvenate on your furniture to restore life to your furnishings, laminate surfaces on various kitchen cabinets, and wall paneling.
Can Rejuvenate Be Used In Kitchen Cabinets?
You can use the right rejuvenating on your kitchen cabinets, either stained or painted.
The ph. balance of this rejuvenates as you can use it to clean oil, grease, and dirt Formica from your kitchen cabinets.
The application of rejuvenation can last you up to three months, and it is perfect for both residential and commercial projects.
The polymer-based rejuvenate formula can fill in for scratches, seal grouts, and restore shine; the ad also protects these kitchen cabinets from new scratches and water damage.
It is recommended that after applying to rejuvenate, it is recommended that you wait for about 45 minutes.
Afterward, you can walk on that floor again, but you can choose to wait for about 12 hours to a day for maximum assurance.
How Can You Remove Rejuvenate from the Cabinet and Furniture Restorer?
We all know what this rejuvenation Is, and now we have it creating a hazy residue on our wooden furniture and cabinets; there are several steps you have to follow to get it, and you should also do this with caution.
The first thing you would need to do is sweep the area and get rid of any dirt or debris, and if possible, you can use the vacuum to get rid of the dust as this would interfere with the cleaning process.
After the area has been cleaned, combine one cup of white vinegar with a gallon of warm water in a large bucket. This solution can work on wooden surfaces like cabinets and furniture.
This acidic vinegar aims to cut through the rejuvenation and lift it off the surface of this wood.
After this has been done, you can now soak your mop in the liquid mixture and squeeze out the excesses before gently mopping onto the spot that contains the rejuvenate;
Ensure that you do not use too much as it can damage the wood floor panels.
The rejuvenate doesn’t go all at once, so ensure that you dip your mop into the solution severally as you repeat the process until all the rejuvenate is gone.
Instead of going through all these, you can use a floor stripper instead, but you should ensure that you get one suitable for your floor type.
To use the stripper, make sure that you let it penetrate the wooden surface for about 10 minutes before you scrub the rejuvenate out of the floor with nylon pads.
After doing this, you can still use your mopper to clean any traces of the solution that might have been left behind.
It is good to have rejuvenated cleaners in your homes or working area, but sometimes, you might get confused when these substances start forming traces of gray stripes on your flooring and furniture.
However, that shouldn’t be a problem because you can quickly fix that with a few steps you should follow.